It is one thing to build an RS232 Relay Controller with a powerful command set and lots of features. We have been doing that for years. It becomes an entirely different breed of controller when the relay controller is capable of watching over your computer when things don't always go as planned. All our 24 Channel RS232 Relay Controllers are part of the ProXR Serial line of controllers. This means not only can will you find the Relay Controller that you need but it will have the ability to expand with your needs.
RS232 Switching with a Serial Port
RS232 Relay or Serial Relay Controllers allow computer controlled switching using the Serial port of your computer. Select NCD Serial Relay Drivers support 8-Channels of 8-Bit / 10-Bit Analog to Digital Conversion (A/D), and include an XR Relay Expansion Port for adding additional relays to the RS232 Relay Controller Board.
Supports any COM Port
An RS232 Relay supports any available COM port at any standard baud rate, allowing easy integration into any program that support serial communications. The RS232 Relay is ideally suited for applications that require data collection and control from a single device. Built-in temperature sensor allows temperature monitoring, analog to digital conversion, and relay control from a single device. RS-232 interface supports baud rates up to 115.2K Baud.
Easy Connection with the Quick Start Kit
The video shows how easy it is to connect an RS232 Relay to the computer with the optional Quick Start Kit. The
R45Pro Quad Relay Controller is shown connected to the optional
QS12 Quick Start Kit.
24-Channel RS-232 Relay Controllers
Displaying 1 - 10 of 10 Products in this Category.
The ProXR Series Controller allow computers to read contact closure inputs, analog to digital converters and control up to 256 Relays using a single computer interface. ProXR series controllers focus on expansion for industrial control applications.
The ProXR Lite product line allows computers to read up to 8 analog inputs and control up to 8 relays.
Non-Expandable, the ProXR Lite Product Line focuses on interchangeable Computer Interface Modules and Low Cost
Focusing on Cost Reduction and High Volume Manufacturing, the Low Cost Series are No-Frills Relay Controllers that offer Basic Computer Control at Low Communications Speed.
Activate Relays when Sensors Reach Limits. Trigger Timers, Counters, and Events.
Use a Computer to Setup the Reactor, then Let the Reactor Work by itself without a computer.
Manually Take Control of Relays from Anywhere in the World using a Computer as needed.
Activate Relays with a Remote Control Key Fob. Trigger Timers, Counters, and Events.
Use a Computer to Setup the Key Fob Reactor, then Let the Key Fob Reactor Work by itself without a computer.
Manually Take Control of Relays from Anywhere in the World using a Computer as needed.
Time Schedule Activated Relays with Computer Interface. Use a Computer to Setup the Time Schedule.
Taralist Series Controllers do not require a computer after initial configuration.
Manually Take Control of Relays from Anywhere in the World using a Computer as needed.
The MirC Product Line Consist of TWO Controllers, Offering Contact Closure Inputs in One Location that Control Relays in a Remote Location.
The Transmitter Shows the Status of the Receiver. Smart Features optionally Turn Off Remote Relay if Communications is Lost. Sold in Pairs ONLY.
The MirX Product Line Consist of TWO Controllers, Offering Contact Closures and Relays on Each Controller. The Contact Closure Inputs at Location A control Relays at Location B. The Contact Closure Inputs at Location B control Relays at Location A. Each Controller Remotely Controls the Other. Smart Features optionally Turn Off Relays if Communications is Lost between the Two Controllers. Sold in Pairs ONLY.