XRSSR4x_MIX Solid State Relay

Expansion 4-Channel Solid State Mixed SSR Relay Controller

Solid State Relay Controller
Unmatched Solid State Reliability and Induction Tolerance!
XR Expansion Controllers are Ready to Grow with your Needs!
Compliance to ROHS Standards



Control this Device Over the Internet
SignalSwitch.com
Signal Switch Compatible

Expansion 4-Channel Solid State Mixed SSR Relay Controller

$89.00/ea
 

Resources

Download Product Manual
 

This movie will explain the different expansion options that can be used with our controllers.

 

This video is a basic introduction to the world of Computer Controlled Switching and Relays in general.
Also read our "Introduction to Computer Control" Article.

 

This video will show you what Induction is and how to use Capacitors to Suppress it.
Also read our Article on Induction Suppression.

Solid State Relays Are Not Suitable for Some Applications.
Please Make Sure Solid State Relays Can be Used in Your Application (CLICK HERE)

Features

Solid State Relay
Solid State Relay Mechanical Drawing

Mechanical Drawing

This Product:

XRSSR4x_MIX
Solid State Relay
 Expansion 4-Channel Solid State Mixed SSR Relay Controller
Stock#: XRSSR4x_MIX  
1-9 $89.00

Related Products:

XRSSR4x
Solid State Relay
 Expansion 4-Channel Solid State Relay Controller
Stock#: XRSSR4x  
1-9 $89.00
QUANTITY DISCOUNTS UP TO 100 PIECES ARE BUILT INTO OUR SHOPPING CART. CHANGE YOUR ORDER QUANTITY TO SEE QUANTITY PRICING.
National Control Devices, LLC
www.controlanything.com
Since October, 1995

Solid State: A Practical Alternative to Mechanical Relays!

Mechanical Relays have a good home in low-cost control applications.  But for some users, only solid state switching will do.  Solid State Relays are ideal for users who require long term reliability, silent operation, or high induction tolerance.  Many inductive control applications require a solid state relay.  Inductive loads such as Motors, Valves, Pumps, Solenoids, and Large Transformers (including Fluorescent Lighting) benefit from the use of solid state relays because they reduce the chances of the inductive load interfering with the logic of the relay controller.

Simply connect the XR Expansion Relay to the XR Port of your Relay Controller and power up the device. In no time you'll be talking to the board and any attached Expansion Boards.

Choose a Solid State Relay for This Controller:

TYPE A

Crydom
D2W202F

SPST-NO

 2A 240VAC Normally Open SPST
Zero Crossing Turn On
Built-In Snubber Circuit
For Use with Resistive Loads
AC Switching ONLY
.06A Minimum Load Required
-30 to 80°C Operating Temperature
D2W Series Data Sheet		 $12.00/each

TYPE B

Crydom
CX240D5

SPST-NO

5A 240VAC Normally Open SPST
Random Turn On
For Use with Resistive Loads
AC Switching ONLY
.06A Minimum Load Required
-30 to 80°C Operating Temperature
CX Series Data Sheet

 $15.00/each

TYPE C

Crydom
CX240D5R

SPST-NO

5A 240VAC Normally Open SPST
Random Turn On
For Use with Inductive Loads
AC Switching ONLY
.06A Minimum Load Required
-30 to 80°C Operating Temperature
CX Series Data Sheet

 $16.00/each

TYPE D

Crydom
PF240D25R

SPST-NO

 25A 240VAC Normally Open SPST
Random Turn On
For Use with Inductive Loads
AC Switching ONLY
.06A Minimum Load Required
-30 to 80°C Operating Temperature
PF Series Data Sheet		 $28/each

TYPE E

Crydom
PF480D25

SPST-NO

 25A 480VAC Normally Open SPST
Zero Crossing Turn On
For Use with Resistive Loads
AC Switching ONLY
.06A Minimum Load Required
-30 to 80°C Operating Temperature
PF Series Data Sheet		 $30/each
NOTICE: Solid State Relays are Silent and Offer Extremely Long Life, but May Not Function Properly when Subjected to Radioactive Environments.  Forced Air May be Required to Achieve Maximum Load Rating.  NCD does NOT Recommend Driving any Relay at Maximum Load.  It is Not Possible for NCD to verify Manufacturer Claims of Load Ratings.  NCD Solid State Relay Controllers have NOT been Tested at the Rated Loads.  Solid State Relays CANNOT be used for Switching DC loads.  Solid State Relays May ONLY be used in AC Switching Applications.  Solid State Relays Require a Minimum Load, and will NOT Function Correctly Unless Minimum Load Requirements are Met.  External Snubber Circuitry May be Required for Certain Applications.  If a Device Turns On, but Does Not Turn Off, this Usually Indicates a Need for a External Snubber Circuit.  This May Indicate Minimum Load Requirements Have Not Been Met.  Please Research Crydom Solid State Relays or be Familiar with this Technology Prior to Purchase.  Please Consult Crydom Engineers to Determine the Best Relay for Your Application www.crydom.com.

Expansion 4-Channel Solid State Mixed SSR Relay Controller

 
  Quantity in Basket: None
Code: XRSSR4x_MIX
Price: $89.00
Shipping Weight: 1.00 pounds
 
Customize your Controller by Selecting up to 4 Different Relays:
Choose a Relay for Location #1:
Choose a Relay for Location #2:
Choose a Relay for Location #3:
Choose a Relay for Location #4:
RoHS (Lead Free) Options:
Non-RoHS Compliant
RoHS Compliant (+$10)
Do you need a Power Supply?:
No Power Supply will be Included
120VAC to 12VDC 1.25A 60Hz USA Computer Grade Regulated Power Supply (+$24)
100-240VAC to 12VDC 1.5A 50/60Hz International Computer Grade Regulated Power Supply with 4 Adapters (+$36)
 
Quantity:
 
Expansion 4-Channel Solid State Mixed SSR Relay Controller

Computer Control

Stand-Alone

Additional Products

Product Support

SECURE SERVER
Visit one of our other
great web sites:
www.SignalSwitch.com
www.controlanything.com

National Control Devices, LLC

World's Largest Manufacturer of Computer Controlled Switching Devices Since 1995.
Have Questions?Access our online support, FAQs, application videos and more via AccessNCD

Attention

Please Note: Our office will be closed for Memorial Day on May 28th.

Customer Support
About National Control Devices
Tools and Resources
National Control Devices, LLC

PO Box 455 - Osceola - MO - 64776
Phone: 417.646.5644 - Fax: 866.562.0406
Open 9AM-4PM Central Standard Time
http://www.relaycontrollers.com/