Control this Device Over the Internet
Signal Switch Compatible
Wireless Control is Now as Easy as Talking to a Serial Port on your Computer!
Long Range XSC Modem
$155/ea
RESOURCES:
Download Latest USB Virtual COM Port Drivers
Download Latest Modem Configuration Utility (MaxStream Software lets you set advanced features of the modem. Not required for most applications.)
Release Date May 11, 2007.
Mounts as a Virtual COM Port
Wireless Communications up to 15 Miles
Plug In, Open the COM Port and Start Sending Commands
Programmable Baud Rate
Compatible with All XSC Devices
LED Status Lights Indicate Communication
USB Powered
Includes USB Cable
Includes Enclosure
PCB IS NOT MOUNTED INSIDE ENCLOSURE INCLUDED ENCLOSURE IS NOT DRILLED
Long Range XSC Modem
Stock #: UXSCMLR
1-99
$484/ea
(click above picture to enlarge)
Standard XSC Modem
Stock #: UXSCMSR
1-99
$155/ea
(click above picture to enlarge)
XSC Modems make Wireless Control EASY!!!
Communicating with a Wireless Device does NOT have to be complicated. Our line of XSC Modems allow first time users to communicate with ANY XSC device, even if it was not manufactured by us!!!
Here's how it works. Plug the XSC Modem into your computer and install the drivers. The XSC Modem will mount as a COM port on your PC. Next, talk to the COM port as though you were communicating with a RS-232 serial device that is directly connected to your PC. That's all there is to it!!!
XSC Modems offer wireless 2-way communications, compatible with any XSC device or network. This device is Powered by the USB Port. Includes USB Cable and Enclosure. PCB is NOT mounted inside enclosure, Enclosure is not drilled. Please
contact us if you have any questions.
The ProXR Series Controller allow computers to read contact closure inputs, analog to digital converters and control up to 256 Relays using a single computer interface. ProXR series controllers focus on expansion for industrial control applications.
The ProXR Lite product line allows computers to read up to 8 analog inputs and control up to 8 relays.
Non-Expandable, the ProXR Lite Product Line focuses on interchangeable Computer Interface Modules and Low Cost
Focusing on Cost Reduction and High Volume Manufacturing, the Low Cost Series are No-Frills Relay Controllers that offer Basic Computer Control at Low Communications Speed.
Activate Relays when Sensors Reach Limits. Trigger Timers, Counters, and Events.
Use a Computer to Setup the Reactor, then Let the Reactor Work by itself without a computer.
Manually Take Control of Relays from Anywhere in the World using a Computer as needed.
Activate Relays with a Remote Control Key Fob. Trigger Timers, Counters, and Events.
Use a Computer to Setup the Key Fob Reactor, then Let the Key Fob Reactor Work by itself without a computer.
Manually Take Control of Relays from Anywhere in the World using a Computer as needed.
Time Schedule Activated Relays with Computer Interface. Use a Computer to Setup the Time Schedule.
Taralist Series Controllers do not require a computer after initial configuration.
Manually Take Control of Relays from Anywhere in the World using a Computer as needed.
The MirC Product Line Consist of TWO Controllers, Offering Contact Closure Inputs in One Location that Control Relays in a Remote Location.
The Transmitter Shows the Status of the Receiver. Smart Features optionally Turn Off Remote Relay if Communications is Lost. Sold in Pairs ONLY.
The MirX Product Line Consist of TWO Controllers, Offering Contact Closures and Relays on Each Controller. The Contact Closure Inputs at Location A control Relays at Location B. The Contact Closure Inputs at Location B control Relays at Location A. Each Controller Remotely Controls the Other. Smart Features optionally Turn Off Relays if Communications is Lost between the Two Controllers. Sold in Pairs ONLY.